PUDU CC1 Pro
Sweeps, scrubs, vacuums and mops commercial floors on its own, with self-charging, automatic water refill and a rear AI camera that re-cleans anything it misses.
Fully automated cleaning, start to finish, with almost no staff effort.
Four ways to clean, one machine
The CC1 Pro sweeps, scrubs, vacuums and dust-mops, and reads the floor type as it goes, so it always cleans the right way for the surface.
- Five modes: sweeping, scrubbing, carpet vacuuming, silent mopping, AI spot cleaning
- Automatic floor detection: suction-only on carpet to protect the fabric
- Edge-to-edge side brush for walls, corners and tight spaces
Finds the mess, plans the route
PUDU VSLAM fused with LiDAR maps and navigates with no markers, even in low-feature spaces. Vision recognition spots spills and heads straight for them.
- VSLAM+ navigation, no markers, up to 5,000–8,000 m² per run
- AI spot scrubbing, up to 3× efficiency (1,500–3,000 m²/h)
- Adaptive intensity: more power on stains, less on clean floor
Checks its own work
A world-first rear AI camera watches the result in real time, re-cleans missed spots and builds a heatmap after every task, while 360° sensing keeps it safe around people.
- Rear AI camera re-cleans missed spots and generates heatmaps
- Self-monitoring of brushes and squeegee for buildup
- 360° multi-sensor safety and dynamic obstacle avoidance
Self-charging, self-refilling
With the optional docking station it refills and drains water and recharges itself, picks up where it left off, and works across floors. Parts swap in about a minute.
- Docking station: automatic water refill, drainage and self-charging
- Mobile tank option means no plumbing changes
- Modular parts swap in ~1 minute; IEC 63327 certified
CC1 Pro at a glance
| Cleaning capabilities | Sweeping, carpet vacuuming, dust mopping, scrubbing |
|---|---|
| Cleaning modes | Standard sweeping, scrubbing, carpet vacuuming, silent mopping, AI spot cleaning |
| Cleaning width (with side brush) | 500 mm |
| Cleaning efficiency | 700–1,000 m²/h all-covered; 1,500–3,000 m²/h spot |
| Navigation | LiDAR + visual fusion positioning |
| Cruising speed | 0.2–1.2 m/s (adjustable) |
| Clean / dirty water tank | 15 L / 15 L |
| Dustbin capacity | 2.5 L (6 L with dust bag) |
| Battery | LiFePO₄, 50 Ah, DC 23–29.2 V |
| Charging time | About 3 h |
| Run-time | Scrubbing 5 h · sweeping & vacuuming 5 h · carpet vacuuming 4 h · silent mopping 9 h |
| Weight | 75 kg |
| Dimensions (L × W × H) | 629 × 552 × 695 mm |
| Display | 10.1-inch LCD |
| Minimum path clearance | 70 cm |
| Noise level | < 70 dB |
| Communication | 4G, Wi-Fi, Bluetooth; e-gate & elevator control (optional) |
| Auto charging & water refill / drain | Supported with optional docking station |
| Ingress protection | IPX4 |
| Certification | IEC 63327 |
Made for busy commercial floors
Best suited to complex, high-intensity spaces where cleaning has to happen reliably, every day.
See the CC1 Pro on your own floors
Call +32 456 95 39 80 or email info@moborobots.com. Based in Anderlecht, Belgium.
PUDU CC1 Pro
Sweeps, scrubs, vacuums and mops commercial floors on its own, with self-charging, automatic water refill and a rear AI camera that re-cleans anything it misses.
Fully automated cleaning, start to finish, with almost no staff effort.
Four ways to clean, one machine
The CC1 Pro sweeps, scrubs, vacuums and dust-mops, and reads the floor type as it goes, so it always cleans the right way for the surface.
- Five modes: sweeping, scrubbing, carpet vacuuming, silent mopping, AI spot cleaning
- Automatic floor detection: suction-only on carpet to protect the fabric
- Edge-to-edge side brush for walls, corners and tight spaces
Finds the mess, plans the route
PUDU VSLAM fused with LiDAR maps and navigates with no markers, even in low-feature spaces. Vision recognition spots spills and heads straight for them.
- VSLAM+ navigation, no markers, up to 5,000–8,000 m² per run
- AI spot scrubbing, up to 3× efficiency (1,500–3,000 m²/h)
- Adaptive intensity: more power on stains, less on clean floor
Checks its own work
A world-first rear AI camera watches the result in real time, re-cleans missed spots and builds a heatmap after every task, while 360° sensing keeps it safe around people.
- Rear AI camera re-cleans missed spots and generates heatmaps
- Self-monitoring of brushes and squeegee for buildup
- 360° multi-sensor safety and dynamic obstacle avoidance
Self-charging, self-refilling
With the optional docking station it refills and drains water and recharges itself, picks up where it left off, and works across floors. Parts swap in about a minute.
- Docking station: automatic water refill, drainage and self-charging
- Mobile tank option means no plumbing changes
- Modular parts swap in ~1 minute; IEC 63327 certified
CC1 Pro at a glance
| Cleaning capabilities | Sweeping, carpet vacuuming, dust mopping, scrubbing |
|---|---|
| Cleaning modes | Standard sweeping, scrubbing, carpet vacuuming, silent mopping, AI spot cleaning |
| Cleaning width (with side brush) | 500 mm |
| Cleaning efficiency | 700–1,000 m²/h all-covered; 1,500–3,000 m²/h spot |
| Navigation | LiDAR + visual fusion positioning |
| Cruising speed | 0.2–1.2 m/s (adjustable) |
| Clean / dirty water tank | 15 L / 15 L |
| Dustbin capacity | 2.5 L (6 L with dust bag) |
| Battery | LiFePO₄, 50 Ah, DC 23–29.2 V |
| Charging time | About 3 h |
| Run-time | Scrubbing 5 h · sweeping & vacuuming 5 h · carpet vacuuming 4 h · silent mopping 9 h |
| Weight | 75 kg |
| Dimensions (L × W × H) | 629 × 552 × 695 mm |
| Display | 10.1-inch LCD |
| Minimum path clearance | 70 cm |
| Noise level | < 70 dB |
| Communication | 4G, Wi-Fi, Bluetooth; e-gate & elevator control (optional) |
| Auto charging & water refill / drain | Supported with optional docking station |
| Ingress protection | IPX4 |
| Certification | IEC 63327 |
Made for busy commercial floors
Best suited to complex, high-intensity spaces where cleaning has to happen reliably, every day.
See the CC1 Pro on your own floors
Call +32 456 95 39 80 or email info@moborobots.com. Based in Anderlecht, Belgium.